Updated 16th November 2019
I am delighted to have Mark Kiernan of Kilcullen CC write this blog on pre race bike check.
When you see his record in Cycling you will understand why I’m so happy to have him write for the peak endurance coaching blog.
Marks worldwide cycling experience
- 10 Ras
- 4 time national track champ
- Irish record holder outdoors
- Represented Ireland at both junior and senior level.
- Raced all over Europe, Africa and the Caribbean
- Rode Paris Roubaix amateur and all the French classics.
Mark has completed his level 1 coaching qualification and is currently taking a level 3 coaching degree with British Cycling.
Working with bikes
He is nearly 30 years in the cycle trade and a great mechanic
What I would class as a true cycling expert. He has put together 10 tips to guide you for keeping your bicycle working well at all times
10 tips on checking your bike before the weekend cycle or race
1 Never leave the bike check until the night before the race ,because if there’s a problem or your need a part chances are the local bike shop will be closed.
Wash and inspect your bike on a Friday if racing Sunday, that way you have time to address any problems
2 Start at the front of the bike , tyres first your looking for any large cuts or rips both on top and in the sidewall of the tyre
Grip the wheel and move it sideways to see if there is any loose play in the bearings ,or any grinding noises
3 Look at the brake pads ,are they worn?. any bits of metal or dirt embedded in the pad? be sure the pads hit the rim face on
4 Stand over the bike and pull the front brake ,is there any loose play in the headset ,rocking back and forth? A quick adjustment with an Allen key will tighten this up
5 Check the bolts on the stem making sure they are all tight. Stem check
6 Run through the gears , but with the wheels you are going to race on I’ve seen people with their training wheels on ,working grand ,only for the race wheels to be jumping around on the gears because the adjustment is slightly different from wheel to wheel
7 have a look at the bottom bracket. any play or grinding in the bearings? is it running smooth?
8 Invest in a chain checker. With 10 and 11 speed chains being so thin these days it’s hard to tell visually if they are worn this little device will let you know when your chain is past its sell buy date
9 Check the rear derailleur, are the adjustment screws correct. Even a little bit out can be costly if the gears go into your rear wheel Adjusting gears
10 The final point .The bike is grand, ready to go, so its another reason to be confident and have a great race.
Enjoy your cycling
Note: always follow the equipment manufacturers instructions . If your not so experienced, and need assistance see your local bike shop mechanic or someone in your club who might help.
Or even organise a bike maintenance session for your club.
Mark can be contacted at firstname.lastname@example.org
Latest posts by Paddy Doran (see all)
- Irish Olympic 2020 track cycling Prospects - December 10, 2019
- How to win like Sam Bennett – number one rule for road sprinters - December 10, 2019
- Sam Bennett. You don’t have to be first to be a winner - December 7, 2019